Lietuvos BMW Klubas

o gal priekiniai stabdziu diskai su suportais tinka is E46 y E36 ? kazka girdejau lyg dedasi zmones...

o gal priekiniai stabdziu diskai su suportais tinka is E46 y E36 ? kazka girdejau lyg dedasi zmones...

nzn i sedana dejau cupo amortikus 2 , gavau po 50 lt gero stovio.. kitur prase po 90 lt.
Del amortiku, tai skirtingiems svoriams pritaikyti, vizualiai gal atrodo vienodai, bet .. aisku as galvos perdaug nesukciau
o del vairo koloneles, idomu jinai tik tinka, ar tokia ir yra? nes haltura padarysi, po to , kas nors ten blogai veiks, ne tiek vairas susisuks pvz , ar leviau veiks.. ?

Brakes

OK, let's get this out of the way first: no, E36 M3 brakes will not bolt on to your 325/328. Nor will E46 M3 brakes. You can use E36 M3 brakes, if you buy E36 M3 spindles. The spindles are a direct bolt-on.

Stock specs:

E36 M3 front: 315mm x 28mm vented rotor E36 M3 rear: 312mm x 20mm vented rotor E36 325/328 front: 286mm x 22mm vented rotor E36 325/328 rear: 280mm x 10mm solid rotor The E36 325 and 328 brakes are identical and completely interchangeable with each other. The only exception is the 328 convertible, which had vented rear rotors. So, 328 convertible rear brakes (calipers too, as the vented rotors are 9mm thicker) are an upgrade to the 325/328.

Other bolt-on brake upgrades are from the E46. *All* E46 non-M3 front brakes will bolt on to the 325/328 spindles. E46 323i, 325i, 328i rear brakes will bolt on to an E36. 330i rear brakes will not work, because they use a larger diameter parking brake.

E46 323i front brakes are identical to the E36 front brakes... no upgrade there. E46 323i rear brakes are identical to the E36 328 convertible rear brakes, so you get the benefit of vented rotors. E46 328i front brakes are identical to E46 325i front brakes... 300mm x 22mm. Same pad fitment as the stock E36 brakes, so you gain 15mm of rotor diameter and you can re-use your existing track pads. For the above conversions, you can keep your existing calipers and pads, and just swap the caliper carriers ("rotor cages") and rotors.

E46 328i rear brakes are identical to E46 325i rear brakes... 294mm x 19mm. These will work with your existing ebrake. For this swap, you will need calipers, in addition to the rotors and carriers. E46 330i front brakes are actually bigger in diameter than E36 M3 brakes, but the rotors are not as thick. 325mm x 25mm. For this swap, you will need 330i calipers and pads in addition to the rotors and carriers.

Pad fitments: Are extremely interchangeable. So we should all try to update this with more detail.

E36 M3 and E46 M3 share the same front pad fitment E30 M3 and E36 M3 share the same rear pad fitment. E36 325, 328, E46 323, 325, and 328 share the same front pad fitment For comparison, E46 M3 brakes are 328mm x 28mm.

E36 M3 owners: No, E46 M3 brakes will not bolt on to your E36.

Noreciau dar pasitikslint.Is kregzdes bet kokios galiu det i savo E46 320d galinius amortikus ?