Lietuvos BMW Klubas

BMW  USB to OBD Ignition Detection Diagnostics Data Cable

This cable will work on BMW cars using both K Line protocols, that's all BMW cars built before march 2007 when BMW changed the way the information was read from there vehicles from K-Line to D-Can, Our cable uses the latest FTDI chipset with the FT232BL controller IC and has TRUE ignition sense detection circuit built within the cable head allowing auto detection of ignition on/off cycles necessary for some coding/programming functions, Our USB-OBD Data cable eliminates the need to use a USB to Serial converter and is an all in one solution that requires no more hardware to use other that the cable and computer, no need for diagnostic heads of any kind, our cables are fully tested before we send them out and come complete with all the necessary drivers for installation so you have peace of mind knowing all you need comes complete with the cable.

Along with the cable you will receive full comprehensive step by step pictorial installation instructions to aid you in your installation as well as support should you need it , Our cable works with ALL versions of Windows Including both Windows Vista & Windows 7 32 & 64bit Versions

19
IFH-0009: NO RESPONSE FROM CONTROLUNIT
EDIABAS_IFH_0009
Meaning:
The ECU is not connected or does not respond.
Causes:
The ECU is not connected (or not properly).
The ECU is not supplied with voltage.
The ECU is addressed with a wrong address.
The ECU parameters are incorrect (concept, times, etc.).
Error correction:
Check the error causes above.
Target system:
WIN SCO QNX